Table of Contents
Advertisement
UK
11 Maintenance
CZ
DE
The maintenance of Uponor Smatrix Space includes the
following:
DK
•
Manual preventive maintenance
•
Automatic preventive maintenance
EE
•
Corrective maintenance
•
Controller LEDs
ES
11.1 Manual preventive maintenance
Uponor Smatrix Space requires no preventive
FI
maintenance except cleaning:
1. Use a dry soft cloth to clean the components.
FR
Warning!
Do not use any detergents to clean the
HR
Uponor Smatrix Space components.
11.2 Corrective maintenance
HU
Resetting the controller
If the controller does not work as expected, for example
due to a hang-up, it can be reset to solve the problem:
IT
1. Disconnect and reconnect the controller to AC
power.
LT
11.3 Controller LEDs
LV
It is recommended to occasionally check the LEDs on
the controller for alarms.
The relay LEDs is on when the relays are closed, during
NL
normal operation.
The radio connection LED flashes when there is radio
activity, i.e. when the relays are controlled or when
NO
the thermostat sends data, and shuts off after a few
seconds.
PL
PT
RO
RU
SE
SK
3 2
The illustration below shows the position of the
controller LEDs.
The table below describes the status of the controller
LEDs.
LED
Relay 1
Relay 2
Radio
connection
U P O N O R S M AT R I X S PA C E / S PA C E P L U S · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
A
B C
Item
Description
A
LED, relay 1 activity
B
LED, relay 2 activity
C
LED, radio connection
Status
• Red, on – Heating mode, actuator activated
• Green, on – Cooling mode, actuator
activated
• Off – no demand for heating or cooling
• Blue, on – Cooling mode activated in menu
02 on the digital thermostat
• Off – Heating mode activated in menu 02
on the digital thermostat
• Orange, flashing – Communicating with the
thermostat
• Orange, flashing rapidly– Communication
with the thermostat has lost for about
1 hour
• Orange, flashing slowly – Waiting for
thermostat registration
• Off – Normal operation
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
