Factory Reset; Replace Batteries - Uponor smatrix space Installation And Operation Manual

09 Climatic controller integration
In this menu it is set whether the thermostat also should
be integrated, and share temperature data, with an
Uponor Smatrix Move PLUS controller.
Default value: no
To change this setting:
1. Press OK and the parameter starts flashing
2. Use buttons - or + to toggle between no , YEs and
CnF.
no – not integrated
YEs – Integrated (requires to be registered with the
Move controller first)
CnF – register with the Move PLUS controller,
confirm on the Move PLUS controller
3. Press OK to confirm the change and return to the
settings menu.
10 Time and date (T-168 only)
In this menu time and date is set. This setting is required
to utilise scheduling programs for this thermostat.
Use buttons - or + to change the value. Press the OK
button to set the value and move to the next editable
value.
To change this setting:
1. Press OK and the parameter starts flashing.
2. Set hours.
3. Set minutes.
4. Set 12 h or 24 h display of time.
5. Set day of the week (1 = Monday, 7 = Sunday).
6. Set day of the month.
7. Set month.
8. Set year.
9. Press OK to confirm change and return to the
settings menu.
U P O N O R S M AT R I X S PA C E / S PA C E P L U S · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L

10.10 Factory reset

Factory reset sets all parameter values to default
settings.
N O T E !
Do not factory reset the thermostat if not
absolutely needed.
1. Press and hold the -, + and OK buttons for about
5 seconds until the screen goes blank.
2. The thermostat is now reset to factory default.

10.11 Replace batteries

Replace the batteries of the thermostat when the low
battery icon is shown in the display.
The illustration below shows how to change batteries.
2
1
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Replace batteries.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
3
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
3 1