Install Uponor Smatrix Space Controller; Placement Of Controller; Attach Controller To The Wall; Connect Components To Controller - Uponor smatrix space Installation And Operation Manual

UK
5

Install Uponor Smatrix Space controller

CZ
DE
5.1

Placement of controller

Refer to the installation preparation guidelines (see
DK
section 4.2 Prepare for installation), and use the
following guidelines when positioning the controller:
EE
• Position the controller just above the manifold.
Check the position of the 230 V AC power outlet, or
if required by local regulations, the junction box.
ES
• Check that the cover of the controller can be
removed easily.
FI
• Check that connectors and switches are easily
accessible.
FR
5.2

Attach controller to the wall

The controller is delivered in a kit including screws and
wall plugs.
HR
Screws and wall plugs
The figure below shows controller mounting hole
HU
positions and how to attach it to the wall using screws
and wall plugs.
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
1 2
5.3
Refer to the wiring diagram found in the end of this
document. The illustration below shows the inside of
the controller.
U P O N O R S M AT R I X S PA C E / S PA C E P L U S · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L

Connect components to controller

B C D E
F G H
Item Description
A Uponor Smatrix Space Controller X-161
B Registration button
C LED, relay 1 activity
D LED, relay 2 activity
E LED, radio connection
F Relay 1 connector, actuator
G Relay 2 connector, heating/cooling output
H 230 V AC 50 Hz
Power connector,
A