First Startup Of Digital Thermostats; Software Version - Uponor smatrix space Installation And Operation Manual

6.7

First startup of digital thermostats

At first startup, before registering, the thermostat
requires some basic settings.
See section 10 Operate Uponor Smatrix Wave PLUS
digital thermostats for more information.

Software version

Current software version is displayed during power up.
T-166
Set time (T-168 only)
When starting the thermostat for the first time, after a
factory reset, or after its been left without batteries too
long, the software requires the time and date to be set.
Use buttons - or + to change the value, press the OK
button to set the value and move to the next editable
value.
U P O N O R S M AT R I X S PA C E / S PA C E P L U S · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
T-168
N O T E !
If no button is pressed for about 8 seconds,
the current values will be saved and the
software exits to control mode.
1. Set hours.
2. Set minutes.
3. Set 12 h or 24 h display of time.
4. Set day of the week (1 = Monday, 7 = Sunday).
5. Set day of the month.
6. Set month.
7. Set year.
8. Press OK to return to run mode.
Date and time can also be set in the settings menu.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
1 7