5. Feeding the tape
After installing the tape cartridge, make sure to feed the tape so as to take up the slack
of the tape.
1
Hold down the
Feed/Cut menu appears.
2
Press
"Feed".
3
Press
When "Feed" is selected, the device feeds the tape 0.7". When "Feed & Cut" is selected,
the device feeds and cuts the tape automatically.
Performing "Feed & Cut" or "Feed" tighten tape and ink ribbon. Be sure to feed the tape
after replacing the tape.
Next
You are now ready to proceed to the next step.
Follow the procedures described on the following pages to learn how to create labels.
24
Getting Started
key and press
or
keys to select "Feed & Cut" or
key.
(= Feed/Cut).
Getting Started
24