K-sun green machine User Manual page 58

Flag) that allow you to easily create labels to be attached to a round-shaped material
such as a cable, wire, and tube, and to neatly label panels, power strips and other
communication equipment. You can easily access any one of the functions by just
pressing the corresponding key.
Telecom/Electrical Label Mode
The Telecom/Electrical label mode has three functional modes (Flag, Wrap and
The Telecom/Electrical Label Mode has three functional modes (Patch Panel, Wrap,
Patch Panel) that allow you to easily create labels to be attached to round-shaped
Flag) that allow you to easily create labels to be attached to a round-shaped material
materials such as a cable, wire or tube and to panels. You can easily access
such as a cable, wire, and tube, and to neatly label panels, power strips and other
any one of the functions by just pressing the corresponding key.
communication equipment. You can easily access any one of the functions by just
pressing the corresponding key.
The following describes the feature of each functional mode.
The following describes the features of each function.
● Mode of "Patch Panel"
You can print multiple words in a single label specifying a space between the words.
Panel A
Patchpanel A
For use with equal text data. For instance if all labels are 1 digit (1,2,3) or all labels
: For attaching to a 3-outlet power strip.
Ex.
are 2 digits (A1, B1, C1, D1) up to 5 places, for example (A1-01). You can enter up to
10 labels at a time.
For this example we are going to make 4 labels, 1 inch apart, that will read:
The following describes the feature of each functional mode.
Length: specify the interval between the outlets.
Label1-Label3: enters "TV","VIDEO",and "DVD".
● Mode of "Patch Panel"
A1-01 A1-02
With the specified length spaced, the three words will be printed on a single label.
You can print multiple words in a single label specifying a space between the words.
Patchpanel B
Choose a 9mm, 209, 3/8" tape.
: For attaching to a 3-outlet power strip.
Ex.
Patchpanel A
Choose Patch Panel, A, Return. ←
: For attaching to a 3-outlet power strip.
Ex.
Choose Length 1.1", Return.
On Label 1 type "A1-01", Return.
On Label 2 type "A1-02", Return.
Label1: enters "VIDEO-sequence numbers".
On Label 3 type "A1-03", Return.
On Label 4 type "A1-04", Do Not Return.
Length: specify the interval between the outlets.
Press key and enters sequence numbers.
Press Print.
Label1-Label3: enters "TV","VIDEO",and "DVD".
See "Printing sequence numbers" (p.74).
With the specified length spaced, the three words will be printed on a single label.
There are many additional options and choices to enhance your label presentation.
Press key and enters "3" as "Repeat print".
After typing your label and before pressing Print, choose Edit. Choices such as
Patchpanel B
See "Prints the same label continuously (Repeat)" (p.83).
decorate, space, font type, wide & narrow, border & line, and bold & italic are available.
: For attaching to a 3-outlet power strip.
Ex.
Choose features as desired and apply them to your entire label or even a single
character for emphasis. Use Preview to review before printing.
52
Telecom/Electrical Label Mode
Here is an example with borders and bold.
Label1: enters "VIDEO-sequence numbers".
Press key and enters sequence numbers.
A1-01
See "Printing sequence numbers" (p.74).
Press key and enters "3" as "Repeat print".
See "Prints the same label continuously (Repeat)" (p.83).
52
52
Telecom/Electrical Label Mode
Telecom/Electrical Label Mode
A1-03
←
←
←
←
A1-02
A1-04
A1-03 A1-04