Function Description - K-sun green machine User Manual

Function description

● Length
Sets the lengths of the label to be printed.
After setting the length, select the position of the characters on the label. Check the position
using the displayed pictographs.
Set the length of the label between 1.0" and 20.0" using
numbers.
When selecting a set length according to usage of the label, the length of the label is set
automatically. It is recommended that you use the tapes shown in the following table
"Recommended tape width".
Usage Length
Mini DV 1.5"
MD 2.2"
Music tape 3.7"
Disk case 4.3"
VHS 5.5"
Binder 7.9"
• If the text does not fit on the set length, a message reading "Text Long!" will be displayed.
It is not possible to print at this time. Reduce the number of characters or make the
characters smaller using the line spacing setting or the expand/reduce setting.
• The length set using the Length function is a guide. It does not correspond to the exact
length of the printed label.
Recommended
tape width
3/8" - 209
1/6" - 204
3/8" - 209
1/6" - 204
3/4" - 218
1/2" - 212
Additional Functions
65