Printing Sequence Numbers - K-sun green machine User Manual

Printing sequence numbers

To create multiple labels with same texts and different numbers or characters, use the
The Green Machine
"Sequence" feature described below. The device automatically increases the numbers
A-Z alphabet. You also have the option of creating 2 or more of the same label while
or characters every time it prints a label.
sequencing (repetition). You cannot sequence barcodes.
To print sequence numbers set the initial value and the number of repetitions (1, 2, 3, 4, 5, 10
times). The number of repetitions sets the number of times the same number will be used.
For this example we are going to create and auto sequence 12 labels.
: Creating 2 labels each numbered 4, 5, 6...
Ex.
File 1 File 2
File 7
File 8
Use ½", 212, 12 mm tape.
One Line 1 type "File" and press Space.
Now press the Sequence key.
At Start enter 1 (the number or letter you wish to start with), Return.
At Repetition, 1 time is the default. For this example, Return.
The screen shows Sequence 2Figure. The default is On. Return.
(You would choose Off if you were sequencing 1-9 or A-Z.)
Now press the Setting/Extra key. Arrow to highlight Repeat print.
1
Align the cursor with the location
Return.
for the sequence number.
At Set number choose 12. Return.
Arrow down to Print exec? Return.
2 Press
Note: If you need two of each label to print at the same time you would choose At
The "Start" screen will be displayed.
Repetition 2 times.
3
Input "4" and press
File 1
File 1
If you needed to sequence A-Z (or a-z) you would need to at the Setting/Extra key,
and at Repeat print choose 26.
File A File B
Select "2 times" for "Repetition"
4
If you needed to sequence Alpha and Number or Number and Number on a label, the
and press
combination is limited to 3.
File A1 File B2
74
74
Additional Functions Additional Functions
allows you to sequence numbers (up to any 2 digits) and/or the
®
File 3 File 4
File 9 File 10
←
←
key.
key.
File 2 File 2
(There are 26 letters in the alphabet).
File C File D
key.
File C3 File D4
File 5 File 6
File 11 File 12
←
Select "Off" for"Sequence 2 figure"
5
and press
If you do not select up to two digit.
File 3 File 3
File E
...
The sequence number (sequence
number icon
displayed at the cursor position.
←
←
key.
N + value area "4") will be
...CONTINUED