Viewing Print Image (Preview) - K-sun green machine User Manual

4. Viewing print image (Preview)

K-Sun® GREEN MACHINE ® can display the print image of the label on the screen so
that you can check the image before you actually print the label. This feature prevents
possible misprint and tape waste.
1
Make sure that the tape cartridge is installed properly.
To display the print image precisely, make sure that the tape width of the installed tape
cartridge is appropriate to your text.
2
Press
The print image scrolls on the entire screen.
After the print preview is finished, it returns to the edit
screen.
• Press any of the following keys to temporarily stop the scrolling text:
, keys or
Release the key to scroll the text again.
• To cancel the preview, press
• Text entered in Telecom/Electrical Label Mode is displayed differently from the actual
layout. Press
Telecom/Electrical Label Mode" (p.53).
• Preview only appears while entering text or Telecom/Electrical Label Mode.
• If the tape cartridge is installed improperly or no tape cartridge is installed, a message;
"No Tape!" will appear and the print image is not previewed.
• When you entered too many lines of text to be printed on the tape, "Line Over!" will
appear on the screen. Preview will not be displayed at this time.
• Preview should be used as a guide. It may not match the printed label exactly.
36
Basic Operations 1
key.
key to check the whole label image. See
key, Text remains stopped while the key is pressed.
or .
Television
50%Off
, ,
"Creating the label in