K-sun green machine User Manual page 10

Cleaning PeelGuard ®
Be sure to turn the power off before removing the PeelGuard ® tray.
When cleaning, do not put your fingers inside the PeelGuard ® .
Otherwise, you might cut your fingers.
Auto-cutter
Keep your fingers off the exit slot where the labels come out during
printing or when the cutter is operating. This may cut your fingers.
Other
Do not put anything heavy on K-Sun GREEN MACHINE ® or leave it
in unstable position. This may cause injury or damage to the device.
Always turn the power off before removing the bundled AC adapter
from the electrical outlet. This may cause malfunction of the device.
About the labels
Before attaching labels, be sure to check the purpose of use and
the material of the adhered surface. Depending on the material,
environmental conditions, etc., following problems may occur.
• Color of the labels change
• Labels come off
• Texts on the label wear off
• Cannot peel off the labels
• Glue remains on the adhered surface
• The adhered surface absorbs the color of the label
• The adhered surface is damaged
We shall not be liable for any damages, losses, costs, or expenses
arising from these problems.
4
Introduction
CAUTION
K-Sun® GREEN MACHINE®
Check