K-sun green machine User Manual page 119

Nothing is printed when
pressing
● Is text entered?
Nothing is printed when there is no text in
the text enter screen or in a fixed form.
● Is there any message on display?
Printing is not carried out when an error
message is displayed on the display.
See "Messages On the Display"
(p.110).
Please wait for a second when a message;
"Wait" is displayed.
● Is the tape cartridge installed
correctly?
You cannot print when there is no
remaining tape in the tape cartridge or
when the top cover is not closed
properly.Install a tape cartridge and close
the top cover firmly.
See "Installing tape cartridges"
(p.21).
®
● Is the PeelGuard
You cannot print while using the
PeelGuard® trimmer
Text is not printed
properly
● Is the tape cartridge installed
correctly?
Remove the tape cartridge and reinstall it
again following the correct procedure.
See "Installing tape cartridges"
(p.26).
key
operating?
®
● Is the printhead free from dirt?
Printing becomes faint when dirt or dust
adheres to the printhead. Rub the
printhead with a cotton swab moistened
with medical alcohol (isopropyl) available
in the market.
®
)
A faint streaking
● Has the batteries run out?
When the batteries are running out,
"Change Batteries" appears on the display.
Replace all the batteries with new AA
alkaline batteries immediately or connect
the AC adapter that comes with the device,
otherwise the K-Sun® GREEN MACHINE
may turn off in the middle of the operation
or during printing.
See "Setting battery type" (p.102).
The printed label is not
cut automatically
● Is the auto-cutter feature disabled?
The printed label is not cut automatically
when the auto-cutter feature is disabled.
See "Turning "Autocut" Off to
Print" (p.87).
● Is the blade worn out?
When you use the PeelGuard
long term, the blade of the PeelGuard
becomes blunt. To replace the blade,
consult the local dealer or our customer
center. Replacement is performed at your
expense.
®
®
over the
®
113
113
Appendix
Appendix