Feeding The Tape - K-sun BEE3 Owner's Manual

5. Feeding the tape

After installing the tape cartridge, make sure to feed the tape so as to take up the slack
of the tape.
1 Hold down the
(= Feed/Cut).
Feed/Cut menu appears.
2 Press or
"Feed".
3 Press .
When "Feed" is selected, the device feeds the tape 0.7". When "Feed & Cut" is selected,
the device feeds and cuts the tape automatically.
Performing "Feed & Cut" or "Feed" tighten tape and ink ribbon. Be sure to feed the tape
after replacing the tape.
Next
You are now ready to proceed to the next step.
Follow the procedures described on the following pages to learn how to create labels.
See "Creating the Sample Label (from entering text to completion)" (p.34).
key and press
to select "Feed & Cut" or
Feed/Cut
Feed & Cut
31
Getting Started