Preparation; Connecting The Bundled Ac Adapter; Installing The Batteries - K-sun green machine User Manual

Preparation

1. Connecting the bundled AC adapter

Connect the AC adapter Model AST1116Y1-1 that comes with your K-Sun® GREEN
MACHINE ® to supply power from the electrical outlet (AC120V).
1 Connect the bundled AC adapter to
the connector on your K-Sun®
GREEN MACHINE
route the cord through the guide as
shown below.
* Be sure to connect the adapter as far
as it can go so as to supply power
steadily.
2 Plug the other end of the bundled
AC adapter into the electrical outlet.
• Unplug the AC adapter from both the device and the outlet after use. This may prevent
possible accidents caused by tripping over the cord.
• When handling the AC adapter cord, be sure not to pull it forcibly or bend it repeatedly.
This may break the cord.
• The safety feature of the device may cut the circuit of the AC adapter when the plug
shorts out or on other occasions.
• K-Sun® GREEN MACHINE ® warranty does not apply to the AC adapter.

2. Installing the batteries

Your K-Sun® GREEN MACHINE ® also works with batteries when an electrical outlet is
not available. Six AA alkaline batteries or nickel-hydride rechargeable batteries (The
SANYO eneloop HR-3UTGA or HR-3UTGB are the only tested and approved rechargeable
batteries for use in the K-Sun® GREEN MACHINE ®
1 Remove the battery cover.
Take off the cover while releasing the tab.
Be sure to turn off the power before installing
the batteries.
18
Getting Started
®
firmly, and
.
Getting Started
18