Setting Up; Preparation; Turning The Power On; Feeding Tape - K-sun BEE3 Owner's Manual

Setting Up

1. Preparation

1 Connect the AC adapter to your LABELShop BEE3.
See "Connecting the AC adapter" (p.25).
2 Install a tape cartridge.
See "Installing tape cartridges" (p.28).

2. Turning the power on

1 Press .
Selected length unit appears. A line head icon
that indicates the beginning of the line and the cursor
then appears.
For further information, see
(p.30).

3. Feeding tape

1
Feed the tape.
Press while holding down
"Feed & Cut" or "Feed" from the displayed menu, and
press .
See "Feeding the tape" (p.31).
Always feed tape!
After replacing a tape cartridge, be sure to feed the tape
to take up any slackness in the tape or ink ribbon.
"Turning the power on"
. Select
Length Unit
inch
1
Feed/Cut
Feed & Cut
11
Introduction