Administration > User Targets - Minicom 232 IP User Manual

17. Administration > User Targets
By default access is allowed to all servers for administrators. For other users,
define the access rights of each user separately.
To do so:
1. From the menu click User Targets. The User Targets Configuration window
appears, see Figure 20.
2. Select a user from the User drop-down menu.
3. Check the Target servers the user can access (according to his access
permissions). To select all Target servers, press
4. Click Apply, the selection is saved.
5. Repeat the above steps for other users.
USER GUIDE
Figure 20 User Targets Configuration
22
.