Clearing The Log; Troubleshooting - Restoring To The Factory Settings - Minicom 232 IP User Manual

27.2.2 Clearing the log

To clear the log, click
save the log.
28. Troubleshooting - Restore factory settings
Section 22 on page 27 explained how to restore factory settings from the
configuartion GUI. You can also restore the factory settings if for example the user
name and password are forgotten and you cannot access the GUI.
To restore the device to the factory settings:
1. You need a USB drive. In the root of the USB drive create an empty file with
name "default".
2. Put the USB drive into one of the USB ports of the Smart 216/232 IP and restart
it by power cycling it. The Smart 216/232 IP will reboot and recognize the
presence of the default file, and will restore the unit to the factory settings, erase
this file and reboot. After rebooting the unit reverts back to the factory settings.
USER GUIDE
. A prompt appears asking if you first want to
40