Assembly - MK Diamond Products CX-3E1 Owner's Manual & Operating Instructions

CX-3E1
Crank Wheel Handle Installation
(A)
Insert Crank Wheel Handle
mounting bolt up through hole in
crank wheel.
Pointer Installation
NOTE:
(A)
Insert bolt on Pointer into mount-
ing flange next to Blade Guard.
Thread Crank Wheel Handle
Limiting bracket properly installed will prevent pointer from contacting engine when
in the up position
Install limiting bracket onto bolt
(B)
onto bolt.
(B)
as shown.
17

ASSEMBLY

(C)
Hold crank wheel handle and
tighten bolt with Allen wrench.
(C)
Thread locking nut on to bolt
and tighten.