MK Diamond Products CX-3E1 Owner's Manual & Operating Instructions page 25

CX-3E1
Diamond Blade Removal
(A)
Locate Blade Guard lock.
(D)
Remove blade.
Handlebar Repositioning for Storage
(A)
Loosen the Tri-Knobs on both
sides of the Handlebar.
(B)
Push Lock Button. Open the
Blade Guard Cover.
(E)
Install the new Blade, Retaining
Bolt and Outer Flange.
(B)
Pivot the Handlebar in the
forward direction towards the
motor. Tighten the Tri-Knobs on
both sides of the Handlebar.
25
MAINTENANCE
(C)
Remove the Blade Retaining Bolt
and the Outer Flange.
(F)
Tighten Blade Retaining Bolt
while holding the Blade Shaft
steady.