Table of Contents
Advertisement
CX-3E1
MAINTENANCE SAFETY
•
NEVER lubricate components or attempt service on a running machine.
•
Keep the machinery in proper running condition.
•
Fix damage to the machine immediately and always replace broken parts, or missing decals.
New Maintenance
Perform the following after initial purchase and operation of the saw.
(A)
Check and adjust tension on
all belts following first
48 hours of operation
(See belt section).
Maintenance Following Use
The following maintenance should be performed following each use.
(A)
Lubricate the Grease Fitting.
(D)
Verify the tightness of all bolts
and screws.
(B)
Lubricate the pivot point of the
Pointer.
22
MAINTENANCE
(C)
Lubricate the Cooling
Supply Valve.
Advertisement
Table of Contents
