CX-3E1
MAINTENANCE
Blade Repositioning
(A)
(B)
(C)
Removal Diamond Blade.
Remove the Cooling Transfer
Remove the Inner Blade
Hose from the Blade Guard.
Flange.
(D)
(E)
(F)
Locate the three Blade Guard
Remove the Blade Guard
Locate the Blade Shaft Cover
Retaining Bolts.
Retaining Bolts and remove the
Retaining Bolts.
Blade Guard.
(G)
(H)
(I)
Remove the Blade Shaft Cover
Install the Blade Guard on the
Install the Inner Blade Flange,
Retaining Bolts and the Blade
opposite side.
Blade, Outer Flange and Blade
Shaft Cover.
Retaining Bolt and tighten.
26