2.8
Front Panel Connectors (JFP1+JFP2)
There are several external switches that monitor and control the AIMB-226.
2.8.1
ATX soft power switch (JFP1/PWR_BTN)
If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to (JFP1/ PWR_BTN), for convenient
power on and off.
2.8.2
Reset (JFP1/RST_BTN)
Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.8.3
HDD LED (JFP1/HDD_LED)
You can connect an LED to connector (JFP1/HDD_LED) to indicate when the HDD is
active.
2.8.4
External speaker (JFP1/SPEAKER)
JFP1/SPEAKER is a 4-pin connector for an external speaker. If there is no external
speaker, the AIMB-226 provides an onboard buzzer as an alternative. To enable the
buzzer, set pins 7 & 10 closed.
AIMB-226 User Manual
26