Appendix 1
maintenance
Items required:
• Lubricant –
petroleum jelly
• Cleaning materials
1 Lubricate the rack with a small quantity of
petroleum jelly:
a Apply a small amount of petroleum jelly at
4 equally spaced points along the track in
the rack recess (Figure 69).
b Run the lift up and down the track several
times to distribute the lubricant.
2 Check all of the safety features on the lift
as described in the 'Testing' section of the
installation manual.
3 Check that the lift still stops flush with the top
step and adjust as necessary – see page 20.
4 Sit on the lift and ride it up and down the
stairs several times:
a Listen for any unusual noises.
b Check for poor ride quality, especially
across the spliced joint.
5 Clean the track.
6 Clean the seat.
7 Clean the power pack.
30 MINIVATOR SIMPLICITY + INSTALLATION MANUAL
tools required:
• None
Figure 69
Need help?
Do you have a question about the Simplicity+ and is the answer not in the manual?
Questions and answers