Ganz CDR-01S User Manual page 8

3.1.1 Remove drive carrier from receiving frame by raise the inner rack handle, then slide
carrier out。
3.1.2 Raise the handle, then bending the open clip to release the cover hook, to slide out
top cover。
3.1.2 Function Settings and Operation
3.1.2.1 Power Indicator and HDD Access indicator
When power is turned on, the indicator will displays the following：
3.1.3 Key lock
A
B
You must turn key lock at " A " location before power on. Otherwise HDD cannot be
operated normally.
3.1.3 The Record Time is different based on Record Speed and Record Quality. Please refer to
following table.
NTSC SYSTEM
Item
Power Indicator
HDD Access Indicator
Status
Segment
A
B
Green LED
Yellow LED
Power
Security status
status
ON Locked (Irremovable)
OFF Unlocked (Removable)
8
Indicator