Record Mode Setup - Ganz CDR-01S User Manual

Press "▲" "▼" to choose options of NTSC : 1,2, 4, 8, 15, 30, 60 / PAL : 1,2, 3, 6,
12, 25, 50 / OFF: for not activated.
* Record Quality : Best / High / Normal / Basic according Menu Record setup.
* Record format : Fields / Frames according Menu Record setup.
3.6.2.6 Press Menu to confirm current operation, and enter to next Timer Record
setup.
3.6.2.7 Press "▲""▼" move location to Timer Enable：Yes or No setup
Yes : To confirm Timer Enable：Scheduling Timer Record function
No : To confirm no Timer Enable：No Scheduling Timer Record function
3.6.2.8 Press Menu to exit and confirm current operation.
3.6.2.9 Press again Menu to exit and close System Setup mode.
3.7

Record mode setup

3.7.1 Enter " Record " setup
To press "MENU" to enter main menu. You will need
to enter password to access main menu. To press
"◄" "►" to move digit, and to press "▲" "▼" to
select number. To press "ENTER" button to confirm
password.
Ex.: Password : 0000 (Default : 0000)
After keying in correct password, and confirm by
pressing "ENTER" button, screen will show following
options.
Timer ------- Scheduling Record
Record ------- Record Mode Setup
Alarm ------- Alarm Mode Setup
Remote ------- Remote Control Setup
System ------- System Setup
Event -------- Event Listt
Password : 0000
20
(Menu)
► Timer
Record
Alarm
Remote
System
Event