Ganz CDR-01S User Manual page 24

To press "MENU" to enter main menu. You will need
to enter password to access main menu. To press
"◄" "►" to move digit, and to press "▲" "▼" to
select number. To press "ENTER" button to confirm
password.
Ex.: Password : 0000 (Default : 0000)
After keying in correct password, and confirm by
pressing "ENTER" button, screen will show following
options.
Timer ------- Scheduling Record
Record ------- Record Mode Setup
Alarm ------- Alarm Mode Setup
Remote ------- Remote Control Setup
System ------- System Setup
Event -------- Event List
Press "▲" "▼"to choose Remote setup item.
Timer
Record
Alarm
►Remote
System
Event
Press "ENTER" to confirm Remote setup, and
screen will be as right displayed.
3.9.2 Remote protocol Interface setup :
3.9.2.1 Press "Enter" to confirm Remote Mode setup.
3.9.2.2 Press "▲" "▼" to choose Interface for Remote protocol setup
RS-232: Use RS-232 interface
RS-485: Use RS-485 interface
Password : 0000
► Remote Mode: RS-232
Baud Rate: 9600
ID: 000
24
(Menu)
► Timer
Record
Alarm
Remote
System
Event
(Menu)
Timer
Record
Alarm
►Remote
System
Event
(Remote)