(1) HDD : HDD is activated
(2) HDD FULL:HDD is full
(3) ALARM:When Alarm Enable : Yes (when alarm is triggered, the led is flashing)
(4) TIMER:When Timer Enable : Yes
(5) PLAY:Play operation
(6) REC:Recording operation
3.3
Back panel connection
VIDEO IN
POWER
VIDEO OUT
1. VIDEO IN
Connect to video source, such as quad, multiplexer, or camera.
2.
VIDEO OUT
Connect to monitor, if no operation with quad or multiplexex, as Fig
Connect to video input of quad, multiplexer, as Fig.
3. External I/O : RS232 / Alarm input
Controlled remotely by an external device or control system.
Alarm input, external I/I explanation.
25 pin com port
ALARM
11