Registering A New Diverse 3000 Handset With The Base Station - BT Diverse 3010 Classic User Manual

Diverse 3010 User Guide
Registering a new
Diverse 3000 Handset
with the base station
Up to six handsets can be registered
and operated from the Diverse 3010
Classic base station. The system allows
you to make internal intercom calls
between two handsets while a third is
making an external call.
Each additional handset you purchase
must be registered at the base station.
If you are registering a Diverse 3000
Executive Handset follow the instructions
in the Diverse 3000 Executive Handset
user guide.
To register a Diverse Classic
handset
At the handset:
Press the SET button.
Press the INT button.
INT
Press the
✱
station numbers are displayed.
Enter the number of the base
1-4
station you want 1-4.
22/3/01 1:34 pm
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
Note
✱
button. The base
Page 43
(Enter 1 for the base station
1
when registering for the first
time. When registering the
handset at additional base
stations, enter 2, 3 or 4 as
necessary.)
Press the OK (
Enter the base station PIN
KEYPAD
(original setting 0000 ).
Press the OK (
The flashes.
At the base station:
Press and hold down the PAGE
button on the base station (for
about 10 seconds) until you
hear the tone.
At the handset:
Display shows the handset
numbers available, eg – 2 , 3 , 4 ,
5 , 6 .
N.B. There is a small delay
before these numbers are
displayed on the screen.
Select and enter one of these
numbers. This is now the
handset's internal number and
it is registered with the base
station. The
) button.
) button.
stops flashing
43