Entering Access Codes - BT Diverse 3010 Classic User Manual

Diverse 3010 User Guide
To set TONE dialling with
time break recall
Press the SET button.
DEF
3
Press the 3 then the 5 button.
JKL
5
Press the OK (
Enter the current base station
KEYPAD
PIN (original setting 0000 ).
Press the OK (
ABC Press the 2 button.
2
Press the OK (
Press the RED PHONE button
to return to standby.
It is possible to set TONE with
adjustable TBR, however, this is not
recommended for the UK network.
WARNING
If Call Barring is set you can only dial
9 112, R 112 or R 999 in an
emergency. Not 9 999. See page 29.
22/3/01 1:34 pm
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
) button.
) button.
) button.
Note
Page 41
To insert an access code
This means the access code
will be automatically dialled
before any number stored in
the Caller Display calls list.
Press the SET button.
GHI
4
Press the 4 then the 0 buttons.
0
Press the OK (
Enter the base station PIN
KEYPAD
(original setting 0000 ).
Press the OK (
Enter the access code for your
KEYPAD
switchboard (this can be up to
3 digits).
Press the OK (
confirm.
Press the RED PHONE button
to return to standby.
Note
✱
You can store RCL,
as the digit keys 0-9.
You may find it useful to enter 144
(for BT Chargecard access) as one of
the access codes, together with an access
pause of six seconds – see 'Setting the
access pause' on the next page.
) button.
) button.
) button to
and # as well
41