Call Allocation - BT Diverse 3010 Classic User Manual

Diverse 3010 User Guide
To reset the handset to its
original settings
Press the SET button.
1
Press the 1 then the 8 buttons.
TUV
8
Press the OK (
Enter the handset PIN
KEYPAD
(original setting 0000 ).
Press the OK (
Press the 0 button.
0
Press the OK (
confirm.
Press the RED PHONE button
to return to standby.
This will reset:
– Handset earpiece volume to
– Auto talk to
– Button beeps to
– Battery warning beep to
– Confirmation beep to
– Base station on-screen
display to
– Handset ringer volume to
– Handset ringer tone
– Ring priority
It will delete:
– Numbers stored in the speed dial
memory.
– Numbers in the redial memory.
22/3/01 1:34 pm
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
) button.
) button.
) button to
1.
ON.
ON.
ON.
ON.
OFF.
5.
1.
OFF.
Page 37
This will NOT reset:
– The handset PIN.
– Registration to the base station.

Call allocation

If you have registered additional
handsets with your Diverse 3010 Classic
base station you can specify the way you
wish the phones to ring.
Group ringing
Your Diverse 3010 Classic will ring all
handsets registered to its base whenever
there is an incoming call. This is called
group ringing.
Ring priority
Your Diverse 3010 Classic can be set so
that an incoming call will ring first at a
preferred handset. If there is no answer,
the call will revert to all other handsets.
This is called ring priority. Your Diverse
3010 Classic is preset for group ringing.
37