BT Diverse 3010 Classic User Manual page 35

Diverse 3010 User Guide
Directory for barred/enabled
numbers
To: Bar numbers.
Enable handsets to call
only specified numbers.
Create a memory list.
Press the SET button.
0
Press the 0 then the 1 buttons.
1
Press the OK (
Enter the base station PIN
KEYPAD
(original setting 0000 ).
Press the OK (
Display shows the first location.
01 1
Press the
if necessary to scroll to the
location you want 1-5.
Press the OK (
Enter the number you want to
KEYPAD
bar, enable or change. Press
the
Press the OK (
confirm.
Press the RED PHONE button
to return to standby.
22/3/01 1:33 pm
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
) button.
) button.
Blank.
Memory
location (1-5).
Function
number entered
previously.
MEMORY button
) button.
button to delete digits.
) button to
Page 31
Note
The barred or enabled numbers must
be switched on before you can use.
See below.
To switch call barring/call
enabling on and off
Once you have set the numbers
you want, you can then switch
call barring/enabling on or off
at any time (see below). You
can do this from any handset
registered to the base station.
Press the SET button.
Press the 0 button twice.
0
Press the OK (
Enter the base station PIN
KEYPAD
(original setting 0000 ).
Press the OK (
Press 1 to bar the numbers
1
you have stored.
DEF
3 to enable handsets to
3
dial only the numbers
stored
0 to switch call barring/
0
call enabling off.
Press the OK (
confirm.
Press the RED PHONE button
to return to standby.
) button.
) button.
) button to
31