Registering A New Diverse Handset With The Base Station - BT Quartet Diverse 2015 User Manual

Registering a new Diverse handset
with the base station
At the handset:
#
1 PWR
Press and hold down the
•
together with the
until the display shows
flashing .
Enter the 4 digit system code
•
(default 0000).
#
Press the
•
stop after about 10 seconds, and
the display shows all the available
handset numbers.
Select and enter one of these
•
numbers. This is now the
handset's internal number and it
is registered with the base
station.
Please Note
Diverse 1000 Handsets will not work
on the Diverse 2015 base. But Diverse
1010/1015 Additional and Executive
Handsets are compatible.
52
button
1
button
PWR
and
1–
button. The beeps
To remove a handset registered at
the base station
These steps can be taken from any
registered handset.
PQRS
#
STO
Press the
• STO
Press the # button.
•
Press the then
• 7
Enter the system code
•
(default 0000).
Display shows all handsets
•
registered at the base.
Enter the internal number of the
•
handset to be removed. It
disappears from the display. If
you enter the wrong number,
press it again to reinstate it.
Press the
• STO
If you are experiencing problems,
please call the Diverse Helpline on
0345 908070.
ABC
2
7
button.
.
2
button to confirm.