BT Diverse 3010 Classic User Manual page 31

Diverse 3010 User Guide
You can press the RED PHONE button
at any time during these steps to quit
the procedure.
To change the handset PIN
The PIN on your handset
protects functions and settings
from unauthorised access.
A handset PIN is necessary in
order to:
– reset the memory
– reset to the original settings.
Handset power must be
switched to ON.
Press the SET button.
1
Press the 1 then the 2 buttons.
ABC
2
Press the OK (
Display shows 12 PIN _ _ _ _
Enter the current handset PIN
KEYPAD
(original setting 0000 ).
Press the OK (
Enter the new four digit PIN.
KEYPAD
Enter the new PIN again.
KEYPAD
Press the OK (
confirm. You hear a
confirmation beep. The new
PIN is stored.
22/3/01 1:33 pm
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
Note
) button.
) button.
) button to
Page 27
Press the RED PHONE button
to return to standby.
Caution
Do not forget your base station PIN
or handset PIN. Special, expert help
is required if you forget the PIN code.
Please contact the Diverse Helpline
on 08457 908070. Calls are charged
at local rates. You may write down
the base station PIN code and your
handset PIN in the space provided in
the front of this book. Note that these
numbers should be kept safe.
To switch the telephone
handset lock on and off
You can prevent an individual
handset from being used to
make all calls except for 999
emergency services.
You can still receive incoming
calls. When the phone rings,
press the GREEN PHONE
button as normal.
Press the SET button.
Press the 1 button.
1
Press the 1 button again.
1
Press the OK (
Enter the handset PIN
KEYPAD
(original setting 0000 ).
) button.
27