Using Additional Handsets; Registering A New Gap Compatible Handset To Your Bt Studio 1100 Base - BT Studio 1100 User Manual

Using additional handsets

If you purchase a new handset to use with your
BT Studio 1100 it will have to be registered to the base.
You will need to do this before you can use it.
If you have purchased a BT Studio 1100 Twin the 2nd
handset comes pre-registered to the base.
Only 2 handsets can be registered to your BT Studio 1100
base at any time.
With 2 handsets, you can make internal calls, page
handsets and transfer external calls between your
handsets.
Registering a new GAP compatible handset to your
BT Studio 1100 base
At the new handset:
1. Follow the new handset's user guide to set the handset
in registration mode.
At the BT Studio 1100 base:
1. Press and hold the base
seconds, until you hear the validation tone (two beeps),
then release the button.
BT Studio 1100 – Edition 4 – 28.06.04 – 5874
button for at least 10
Page
IMPORTANT
You must choose a handset that is
GAP compatible to use with your
BT Studio 1100.
If the handset does not locate the
base, the handset will return to the
previous menu. Try to register
again by using a different available
base number. Ensure that you are
in close vicinity of the base.
37