Using Your Diverse 3010 Classic With A Switchboard; Setting To Tone Or Pulse Dialling - BT Diverse 3010 Classic User Manual

Diverse 3010 User Guide
Using your Diverse 3010
Classic with a switchboard
Your Diverse 3010 Classic can be
connected to compatible switchboards.
If in doubt please contact your
switchboard supplier.
Setting to Tone or Pulse
dialling
Your Diverse 3010 Classic is pre-set to
TONE dialling – you will hear a tone
beep each time you dial a number.
Tone dialling is suitable for all modern
digital exchanges. If you cannot make
a call with TONE dialling, you may
need to switch to PULSE dialling.
To set PULSE dialling with
earth recall
Press the SET button.
DEF
3
Press the 3 then 5 buttons.
JKL
5
Press the OK (
Enter the current base station
KEYPAD
PIN (original setting 0000 ).
Press the OK (
GHI
Press the 4 button.
4
40
22/3/01 1:34 pm
Diverse 3010 ~ 4th Edition ~ 28th February ~ 3722
) button.
) button.
Page 40
Press the OK (
confirm.
Press the RED PHONE button
to return to standby.
To set TONE dialling with
earth recall
Press the SET button.
DEF
3
Press the 3 then 5 buttons.
JKL
5
Press the OK (
Enter the current base station
KEYPAD
PIN (original setting 0000 ).
Press the OK (
Press the 3 button to set Tone
DEF
3
with fixed flash time.
Or
Press the 1 button to set Tone
1
dialling with Earth recall.
Press the OK (
confirm.
Press the RED PHONE button
to return to standby.
) button to
) button.
) button.
) button to