Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
16:9
Backup mode OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
16:9
Primary backup input
When the conditions for the Backup Input function
are met
Backup mode OK
Audio input select
Set up the sound when a video input is selected.
1
Select the video input with
Set the audio input with
Audio input select
HDMI1
HDMI2
DIGITAL LINK
DVI-D
PC
COMPONENT
VIDEO
Video input
HDMI1
HDMI2
DIGITAL LINK*
1
DVI-D / PC /
COMPONENT*
/
2
VIDEO
No audio: No audio input (Mute)
1: [DIGITAL LINK] is displayed for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 46)
When the video input and the audio input differ from
each other, the audio input is displayed as below.
HDMI1
16:9
AUDIO1 IN
.
.
HDMI1
HDMI2
DIGITAL LINK
AUDIO1 IN
AUDIO1 IN
AUDIO2 IN
AUDIO2 IN
Audio input
HDMI1 / AUDIO1 IN /
AUDIO2 IN / No audio
HDMI2 / AUDIO1 IN /
AUDIO2 IN / No audio
DIGITAL LINK / AUDIO1 IN /
AUDIO2 IN / No audio
AUDIO1 IN / AUDIO2 IN /
No audio
English
65