Function Button Settings - Panasonic TH-42LF8U Operating Instructions Manual

Function button settings

Assigns specific functions to the numeric buttons (<1>
to <6>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with
[Function button settings] - sub menu screen
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guide
2
Select the numeric button with
and set the function to assign with
.
■
Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
[HDMI1] / [HDMI2] / [DIGITAL LINK]*
[PC] / [COMPONENT]*
1: [DIGITAL LINK] is for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-
in select]. (see page 46)
[Memory load]
Memory can be loaded with single-touch operation.
Memory load (see page 43)
[MEMORY1] - [MEMORY6]
● [MEMORY1] to [MEMORY6] load functions are
already assigned to <1> to <6> respectively.
These settings cannot be changed.
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Network settings],
[Multi display settings]
● Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV Mute]
●
Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
control except Standby (ON/OFF) button.
[Digital zoom]
● Switches to [Digital zoom] mode by pressing
numeric buttons. (see page 32)
58
English
Input
Input
HDMI1
↓
HDMI2
Memory load
DIGITAL LINK
↓
DVI-D
PC
Shortcut
USB
On
/ [DVI-D] /
1
/ [VIDEO] / [USB]
2
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
LF8
.
[Input]
1 HDMI1
2 HDMI2
3 DVI-D
4 PC
5 COMPONENT MEMORY5
6 USB
LF80
[Input]
1 HDMI1
2 HDMI2
3 DIGITAL LINK MEMORY3
4 DVI-D
5 PC
6 USB
■
Function button guide
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
● When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
[Memory
[Shortcut]
load]
MEMORY1 [Signal]
MEMORY2 [Screensaver]
MEMORY3 [Set up timer]
[Power
MEMORY4 management
settings]
[Network settings]
MEMORY6 [AV Mute]
[Memory
[Shortcut]
load]
MEMORY1 [Signal]
MEMORY2 [Screensaver]
[Set up timer]
[Power
MEMORY4 management
settings]
MEMORY5 [Network settings]
MEMORY6 [AV Mute]