Component/Rgb In Terminal Connection; Serial Terminal Connection - Panasonic TH-42LF8U Operating Instructions Manual

COMPONENT/RGB IN terminal
connection
Note
● Additional video equipment, cables and conversion
adapter shown are not supplied with this set.
R/P /C B/P /C
R R B
COMPONENT/RGB/VIDEO IN
Y P
B
Video pin cable (commercially available)
Pin-BNC conversion plug (commercially available)
Stereo audio cable (commercially available)
DVD Player
RGB camera
Note
●
In accordance with the input signal connected to
COMPONENT/RGB IN terminal, select the input
[Component] or [RGB] in [Signal] - [Component/RGB-
in select]. (See page 46)
● The RGB signal input to COMPONENT/RGB IN
terminal corresponds to "SYNC ON G" only.
20
English
Shared with VIDEO IN.
G/Y/VIDEO
B
AUDIO2 IN
Stereo mini
plug (M3)
P R L
R

SERIAL terminal connection

The SERIAL terminal conforms to the RS-232C interface
specification, so that the Display can be controlled by a
computer which is connected to this terminal.
RS-232C Straight cable (commercially available)
PC
Note
●
Use the RS-232C straight cable to connect the
computer to the Display.
●
The computer shown is for example purposes only.
●
Additional computer and cables shown are not
supplied with this set.
●
LF80 series only
For serial control, make sure to set [Network settings]
- [Serial control] to [SERIAL IN]. (see page 54)
(Male)
(Female)
D-sub 9p