Panasonic TH-42LF8U Operating Instructions Manual page 56

Hide thumbs Also See for TH-42LF8U:
Table of Contents

Advertisement

Even if [DIGITAL LINK mode] is set to [Long
reach], when the twisted pair cable transmitter
does not support the communication method of
[Long reach], it will not be connected properly.
DIGITAL LINK status (LF80 series only)
Display the DIGITAL LINK connection environment.
Select [DIGITAL LINK status] with
<ENTER>.
DIGITAL LINK status
LINK status
HDMI status
Signal quality
Min
Max
[LINK status]:
1 of the followings will be displayed.
[No link]:
No LAN connection, etc.
[DIGITAL LINK]:
Connected to the DIGITAL LINK device by LAN.
[Long reach]:
Communication method is set to [Long reach] and is
connected to the DIGITAL LINK device by LAN.
[Ethernet]:
The PC is connected to the DIGITAL LINK / LAN
terminal of this product and is LAN connected.
[HDMI status]:
1 of the followings will be displayed.
[No HDMI]:
DIGITAL LINK not connected
[HDMI ON]:
DIGITAL LINK connected
[HDCP ON]:
HDCP supported on DIGITAL LINK
56
English
and press
No link
No HDMI
-XX dB
-YY dB
[Signal quality]:
It is the quantified minimum and maximum numbers
of errors that have occurred. The display colours are
red, yellow, or green, depending on the number.
Signal quality
-12dB or below
Green
-11 to -8dB
Yellow
-7dB or above
Red
The number is represented by yellow or red if
the LAN cable is disconnected or the cable is not
shielded.
This signal quality shows figures between the
twisted pair cable transmitter that is connected and
the display.
DIGITAL LINK menu (LF80 series only)
Displays the setting menu of Digital Interface Box.
Select [DIGITAL LINK menu] with
<ENTER>.
Note
This function can only be selected when the
Panasonic device that supports DIGITAL LINK output
(ET-YFB100G, ET-YFB200G) is connected to a
DIGITAL LINK / LAN terminal and its power is on.
For details, refer to the manuals of the devices that
support DIGITAL LINK output.
[AMX D.D.]
Set whether to allow the Display to be detected by AMX
Device Discovery.
[On]:
Enables detection by AMX Device Discovery.
[Off]:
Disables detection by AMX Device Discovery.
For more details, visit the following web site.
http://www.amx.com/
Display
Reception
Colours
Status
Good
Bad
Terrible
and press

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-55lf8uTh-49lf8uTh-55lf80uTh-42lf80uTh-49lf80u

Table of Contents