Multi Display Settings - Panasonic TH-42LF8U Operating Instructions Manual

Multi display settings

1 to 10 displays can be aligned in horizontal direction
and vertical direction respectively, and those displays
are regarded as one group. The enlarged image is
shown on the combined display.
[Multi display settings]
Multi display settings
Multi display setting
Horizontal scale
Vertical scale
Bezel H adjustment
Bezel V adjustment
Location
Note
●
When the multi display is set to [Off], adjust to the
same angle of view for [Position] (see page 35).
Then, set the multi display to [On]. Again, make
fine adjustment of the angle of view for [Position].
● The [Position] menu can be adjusted in the multi
display status.
■
[Multi display setting]
[Off]:
The display is not divided when enlarged.
[On]:
The display is divided when enlarged.
When [On] is set, the display aspect is [16:9].
■
[Horizontal scale]
Set the horizontal scale in the multi display.
1-10 (1 to 2 for USB input)
■
[Vertical scale]
Set the vertical scale in the multi display.
1-10 (1 to 2 for USB input)
Example:
[Horizontal scale] [5] and [Vertical scale] [5] is set in the
multi display
52
English
Off
2
2
0
0
A1
■
[Bezel H adjustment], [Bezel V adjustment]
Adjust the area of image hidden in the joint horizontally
and vertically respectively.
0-100
Display example
Setting value: 0
Displays the entire image including the joint area.
(Suitable when displaying character information on
PC.)
Setting value: 100
Does not display the image of the joint area.
(Suitable when displaying motion pictures.)
■
[Location]
Assign the multi display position.
Example:
[Horizontal scale] [10], [Vertical scale] [10]
....
A1 A2
....
B1 B2
.... .... ....
....
I1 I2
....
J1 J2
Select from A1 to J10.
● The displayed content for setting changes
according to the settings for the [Horizontal scale]
and [Vertical scale].
A9 A10
B9 B10
.... ....
I9 I10
J9 J10