USB Media Player
Function description
The USB media player displays still pictures and
motion pictures saved in a USB memory by inserting
the USB memory device into the display unit.
Note
●
To use this function, set [USB media player] to
[Enable] in [Setup] - [USB media player settings]. (see
page 57)
Single Media Player
Files are played by a single unit.
Multi Media Player
Connecting more than one unit using LAN cables plays
back files in the USB memory simultaneously.
One of the multiple units becomes the master, and the
others are slaves. The two-unit configuration example is
shown below.
For LAN connection, see "Network environment (Multi
Media Player only)" (see page 92).
Master
USB
memory
Hub or broadband router
Note
●
For Multi Media Player, one USB memory device is
required for one unit.
●
Pictures in the USB memory cannot be displayed
via a daisy chain connection with the DVI-D IN/OUT
terminal.
USB
memory
Slave
USB
memory
Preparation
■
Supported device
●
Commercially available USB memory devices are
supported. (Those with security functions are not
supported.)
●
USB memory devices other than those formatted in
FAT16 or FAT32 cannot be used.
●
Up to 32 GB of USB memory in size are supported.
●
Only single partition configuration is supported.
■
Preparation
Prepare the following files in the USB memory for the
media player.
●
Play file
●
Scenario (as necessary)
●
File list (as necessary)
■
Play file
The unit's Media Player supports the formats below.
File name (Extension)
Still image
JPG, JPEG, JPE
AVI, MKV, ASF, WMV, TS, MTS,
Moving image
MP4, 3GP, MOV, FLV, F4V
Codec
Moving image
Codec
Maximum resolution
MPEG4VISUAL
480@30fps
MPEG4AVC
1080@30fps, High Profile
VC-1 Advanced
1080@30fps
VC-1 Simple &
1080@30fps
Main
Audio
Sampling frequency
Codec
(kHz)
8/11.025/12/16/22.05
MP3
/24/32/44.1/48
8/11.025/12/16/22.05
AAC
/24/32/44.1/48
WMA Standard
8/11.025/12/16/22.05
WMA 9
/24/32/44.1/48
WMA 10 Pro
Still image
Codec
JPEG
Bit rate
(kbps)
8-320
1-1728
1-1728
Maximum resolution
4096×4096
English
87