About Originals
This section describes the original sizes and thicknesses available with the Printer. It
also describes the scannable range.
Scannable Original Conditions
Maximum width: 914.4 mm (36 inches)
Minimum width:
Maximum length: 10000 mm (393.70 inches)
Minimum length: 210 mm (8.27 inches)
Thickness:
Type:
Other conditions:
Unscannable Originals
The following originals may cause paper jams, or they may be damaged.
- Originals non included in those described in
( & page 19 )
- Originals with staples or clips
- Originals with tears, fissures, or holes
- Originals with wrinkles, rips, or other defects
- Originals with curls or waves
- Originals with folds
- Originals with 2 or more sheets affixed or overlapped together
- Originals with processed surfaces. For example, thermal paper, art paper, foil,
carbon paper, or conductive paper
182 mm (7.17 inches)
0.05 (0.002 inches) to 0.2 mm (0.008 inches)
Non-transparent or semi-transparent originals
- Originals with no folds, wrinkles, tears, or holes
- When the original is rolled, the diameter must be at least 40 mm
(1.57 inches)
- When the original is rolled, extend it to make the curl width
80 mm (3.14 inches) more, and the height 10 mm (0.39 inches)
or less as follows.
Original
LP-1030-MF User's Manual for Multifunction Printer Operation
10 mm (0.39 inches)
or less
80 mm (3.14 inches)
or more
Scannable Original Conditions
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
19