Copy Function Overview - Oki lp-1030-mf User Manual

Copy Function Overview

Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
30
LP-1030-MF User's Manual for Multifunction Printer Operation
The copy functions available with the Printer are as follows. The detailed setting
procedures are described from the next page.
Function
Original Type
Copy Density
Paper Position
Original Size
Original Size Standard
Original Output
Direction
Partial Copy
Background
Compensation
Contrast
Sharpness
White on Black Reverse
Scale
Blank Space
Paper Type
Centering
Erase Frame
Output Slot Selection
Mirror Reverse
Number of Copies
Moderate Scan
Original with text &
lines
Blueprint Original
Sort
Description
Select an image quality type appropriate for the original.
Adjust the copy density.
From the paper types installed in the Printer, select the paper
type for copying.
Specify the size of the original.
Select the original size standard.
Set the output direction for the original.
Copy an original partially.
Delete background colors.
Adjust the contrast of the original.
Adjust the sharpness of the original's contours.
Copy an original with its white and black reversed.
Scale the size of the original.
Set blank space to the front and rear of the original.
From the paper types installed in the Printer, select the paper
type for copying.
Copy the image at the center of the paper width.
This function is effective at Synchro Scan with the roll paper
position specified.
Erase the area around the original before copying.
Select the output slot for the paper.
Perform mirror reverse for the original before copying.
Set the number of copies.
Feed the original moderately on scanning to prevent the original
from being damaged.
Adjust the image quality appropriate for the originals with text
and lines.
Set the image quality appropriate for the blueprint original.
Sort multiple originals before copying.