Selecting the Original Size
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
34
LP-1030-MF User's Manual for Multifunction Printer Operation
Select the size of the original.
The following four settings are available for the original size.
Auto
With Auto selected, the Printer identifies the original to be:
- A standard portrait or landscape size; or
- A non-standard size.
Note: In the submission mode, Auto cannot be selected.
Portrait
Select for standard size originals and vertically oriented.
Landscape
Select for standard size originals and horizontally oriented.
Synchro Scan
Select for non-standard size originals. When Syncro Scan is selected, the paper is
cut to the same length as the original, which is called as synchro cut.
Note
When the original size is set to Auto, the
and
Erasing the Frame ( & page 50 )
When
Selecting the Original Size Standard ( & page 38 )
Defined, all settings are handled as Synchro Scan, even when Portrait or
Landscape is set to On.
Adding Blank Spase ( & page 47
settings are disabled.
is set to User
),