Unclear Copying Or Scanning - Oki lp-1030-mf User Manual

Unclear Copying or Scanning

Q.
Black lines appear on scanned image or copy printout.
A.
The shading guide or scanner glass is dirty.
Clean the shading guide and scanner glass
Caution
Before scanning or copying, remove any dirt from an original. If the original
‹
with dirt, e.g., toner, ink, or dust adherence is scanned or copied, the inside
of the scanner may become dirty.
When an original is long, copy or scan carefully so that it does not touch the
‹
floor.
If you cannot remove a dirt from the original, copy or scan it with a carrier
‹
sheet.
Q.
A fold in the original is copied or scanned in black.
A.
The shadow of the fold was scanned.
Before scanning, flatten the fold as flat as possible.
Change the loading direction of the original (turn by 90°). Try scanning
again.
Increase the Background Compensation setting
Q.
An image on the back of the original is scanned or copied.
A.
With a thin original, image on the back side may appear on the front side,
which is scanned or copied.
Increase the Background Compensation setting
( & page 26
LP-1030-MF User's Manual for Multifunction Printer Operation
).
( & page 42 ).
( & page 42 ).
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
115