First-Time Operation - MobileDemand T1400 User Manual

First-time Operation

Inserting Battery Pack
To insert the included standard battery pack into the xTablet
T1400:
1. Disconnect any cords connected to the xTablet T1400.
2. Turn the xTablet T1400 over, back facing up.
3. Rotate the D-Rings so they are out of the way for the
battery to be removed.
4. Locate the Battery Lock and push it to the "Unlocked"
position.
5. Insert the battery on the connector-pins side first, and then
lower the battery into the battery compartment until you
hear the latch click.
6. Make sure the edges of the battery are flat against the
housing once fully inserted. Then move the D-rings back
into place
Removing the Battery Pack
1. Disconnect any cords connected to the computer.
2. Turn the xTablet T1400 over, back facing up.
3. Rotate the D-Rings so they are out of the way for the battery to be removed.
4. Locate the Battery Lock and push it to the "Unlocked" position.
5. Locate the Battery Latch that is spring-loaded. Pull back and hold.
6. Lift the battery out using the opening on side of battery compartment. Note if the hand
strap is attached you will need to rotate the D-rings out to remove the pack easily.
xTablet T1400 Users Guide
5