How To Use The Lte Skylight Connection Mgr Software - MobileDemand T1400 User Manual

Xtablet

Hide thumbs Also See for T1400:

Table of Contents

How to use the Skylight Connection Manager Application

Setting up Mobile Broadband with the Skylight application & GPS functionality with

the MobileDemand xTablet T1400

Thank you for purchasing your MobileDemand xTablet T1400 with the mobile broadband GOBI module.

To use mobile broadband network connections with your MobileDemand xTablet T1400, you use the Sierra

Wireless Skylight application called Skylight.

The Skylight application is already installed on your computer; the icon is on your desktop.

You must set up the Skylight application before you can use your mobile broadband network.

To do so, perform the following steps:

Step 1: Verify that WWAN Mode is enabled

Step 2: Start the Skylight application

Step 3: Choose your Carrier in the Skylight application

Step 4: Inserting your SIMM card

Step 5: Connecting to the carrier

Step 6: Set up xTablet GPS. You do not need a mobile broadband account to use the MobileDemand

xTablet's GPS feature.

Step One: Verify that WWAN Mode is enabled

Start up the xTablet T1400

Press the Home Key to bring up the HotTab application.

You will see this menu pop up

Press Devices

Verify that this icon is ORANGE. This verifies that your WWAN radio module is enabled.

xTablet T1400 User Guide

xTablet T1400 Users Guide

Table of Contents