Ice And Water Dispenser - Viking VCSB483D Service Notebook

Hide thumbs Also See for VCSB483D:
Table of Contents

Advertisement

ICE and WATER DISPENSER

Water Dispenser Operation: it takes
approximately 1 minute after initially
connecting refrigerator to household
water supply before water dispenses.
Discard first 10 to 14 containers of water
after initially connecting refrigerator to
household
water
supply
e
xtended periods of non-use.
Dispense water by pressing sturdy
wide mouthed con
water dispenser pad.
Stop water dispensing by releasing
pressure on pad. A small amount of
water may continue to fall.
shelf is not self-draining.
spills should be wiped dry.
Ice Dispenser Operation:
Select cubed or crushed mode by
sliding lever on dispenser panel.
Dispense ice by pressing wide
mouthed
con
tainer
d
ispenser pad.
and
after
tainer against
Spill
Large
against
ice
41
Stop ice dispensing by releasing
pressure on pad before container is
full. Som
e ice will continue to fall.
Do not remove container until last of
ice falls.
IMPORTANT:
Reduce spraying of
crushed ice by holding wide mouthe
c
ontainer directly under ice chute and
as high as possible in dispenser area.
If dispensing ice continuously, dispenser
motor is designed to shut off
m
inutes. Motor resets after 3 minutes
and dispensing can continue.
A slight delay occurs when switching
between cubed and crushed modes.
Pieces of crushed ice will vary in size
and shape. "Snow" may form on door
and
ice
chute
d
ispensing crushed ice. Allow "snow"
to evaporate or wipe dry.
Dispenser o
perates only with cubes of
p
roper size and crescent shaped cubes to
ic
e bucket.
d
after 3 to 5
whe
n
repeatedly

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VCSB483D and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Dfsb483dDdsb483d

Table of Contents

Save PDF