Troubleshooting - Maxcom MC6950 Quick Start Manual

Troubleshooting

PROBLEMS
Nothing displayed on screen
Batteries are not charged
The handset cannot find the
base unit
A tone alert is emitting during
or out of communication
No dialling tone
VERIFICATION
Batteries are wrong inserted
Batteries are empty
Batteries are correctly inserted and not
empty
Batteries are wrong inserted
Batteries are empty
Batteries are correctly inserted and not
empty
You are too far from the base unit
Base unit is not connected
Verify the batteries
Reset the base unit
Battery are empty
You are too far from the base unit
Check the telephone plug
SOLUTIONS
Respect the polarity of the batteries
indicated on the handset batteries
compartment
Put the handset on the base
Remove the batteries and reinserted
them once again
Respect the polarity of the batteries
indicated on the handset batteries
compartment
Clean the charge contact points of the
handset and on base unit.
Remove the batteries and reinserted
them once again
Move the handset close to the base
unit
Connect the base unit following quick
start guide description
Remove the batteries and reinserted
them once again
Remove and plug the adapter of the
base unit
Recharge the batteries
Move the handset close to the base
unit
Remove and plug the telephone plug
to the base unit and the telephone
outlet