Intercom - Maxcom MC6950 Quick Start Manual

Intercom

Press on handset :
Call another handset
This feature is only applicable when there are at least two registered handsets. It allows you to
make internal calls, transfer external calls from one handset to another handset and make
conference calls. If the called handset is not answered within 60 seconds, the called handset will
stop ringing and the calling handset will return to standby mode.
Note: If only one handset is registered to the base station, when INT is pressed, it will display FAILED.
In idle mode, press CLEAR and all the other registered handset numbers will display, along with a "9".
Enter the number of the handset that you want to call.
Note: If only two handsets are registered to the base station, pressing INT will call the other
handset immediately.
Note: If there is an external call while you are on an intercom call, you'll hear
warning beeps,
and you have to end the intercom call, before you can answer the external call.
Call all other handsets
In idle mode, press CLEAR and all the other registered handset numbers will display, along with a "9".
Enter "9" to call all registered handsets.
Receiving an internal call
When the handset rings, press
Receiving an external call during an internal call
If there is an external call while you are on an intercom call, you'll hear warning beeps. You have
to end the intercom call, before you can answer the external call.
to establish the intercom call.