Maxcom MC6950 Quick Start Manual page 24

Press on handset :
x 3
x 8
or
Set the Direct Memory keys
There are three direct memory keys M1, M2, M3 and M4. You can store a number of
up to 20 digits into each of these keys and dial them directly from idle mode.
In handset, by pressing and holding the M1, M2 or M3 key for more than 2 seconds.
OR
In base, by pressing the M1, M2, M3 or M4 key, and press
Enter in the menu and Select
Select MEM KEY
Press MENU / OK and UP / DOWN to select the desired memory key from M1, M2 and M3, M4.
Press MENU / OK to enter a new number or edit the number stored already.
Press MENU / OK to confirm.
.
HS SET
key to dial out.